Skip to content
Today we are going to solve a fault that can occur in the coffee maker Delonghi Nespresso Lattissima: "My Delonghi Lattissima coffee maker does not make coffee".
When the coffee maker stops pouring water, and the pump makes a loud noise,.com it may be necessary replace the pipe. Although, when turned on, the piece tries to move the water from the tank,.com It is possible that the moving parts of the pump have become blocked: sometimes it is due to the normal use of the coffee maker, sometimes due to having kept the appliance stopped for too long.
This repair is somewhat complex due to the small space that we have, but following the steps that we detail, anyone can do it, you just have to be a little handy. In electrotodo.com We will try to make it easy for you. You have all the accessories and spare parts used in the video for this appliance below in the description, and all the parts for appliances at https://www.electrotodo.com
In this tutorial we are going to address the repair of this high-end capsule coffee maker from Delonghi. How to change the Pump of the Delonghi Nespresso Lattissima EN520 coffee machine step by step? We explain how.
By the way, if you can't find your spare part in our online store, we can upload them to the web for you. Repairing electrical appliances is easier than ever with spare parts, parts and accessories from electrotodo.com.
Necessary material for repair
- Phillips screwdriver medium
- tip knife
- cutting pliers
Step by step repair
Disassemble first...
- Disassemble casings: unscrew rear screws and remove the casings held in place with pressure clips
- To facilitate the removal of the insulator that reduces the sound of the pump, it is best to cut (with the cutting pliers) the fastening that joins it to the resistance of the coffee maker. Now we can take the pump out of its housing a little
- Disassemble tubes and cables from the Delonghi coffee machine pump: we must remove the top tube first removing the fixing clip that holds the tube attached to the pump. It is also advisable to cut the rubber ring that joins the tube to the insulator.
- Remove cables electrical pump, which go with fast-on connection
- Remove lower tube that joins the pump to the rest of the coffee maker
- Remove RACIAL, upper threaded to the pump
- Remove together that remain inside the pump (green) and inside the fitting (black)
- Pull apart insulating of the pump (new pumps come without the insulator.
And now the reverse process...
- change the coffee pot pump: place the insulator on the new Delonghi pump
- To place down tube and wiring on the new pump: don't forget to fit the o-rings!
- To place pump at the bottom of the housing.
- To place top tube and secure with the fixing clip.
- Place the pump in its housing in the coffee maker and fix the lower tube to the coffee maker
- Mount casings (press) and tighten rear screws
... A little messy? Explained like this, it may seem very difficult, but don't worry! You can also see a video-tutorial in which Pepe, Our appliance technician performs the repair in a few minutes. Connect to our Youtube channel and follow us to repair your appliances.
💚 All your spare parts in https://www.electrotodo.com/